GE AKM14 Serie Manual Del Propietario Y Instrucciones De Instalación página 10

PREPARE THE CASE
4
A Remove shipping screws located on the
top and the sides of the case.
Depending on the
model, there can be
two screws on each
side.
Slide the air conditioner from the case by
B
gripping the base pan handle and pulling
forward while bracing the case.
Your unit may come with internal
C
packaging. This packaging must be
removed prior to installing the air
conditioner back into the cabinet.
Installation Instructions
10
PREPARE THE CASE (cont.)
4
Attach the top rail gasket to the bottom of
D
the top rail.
E
Use small pieces of adhesive foam to
cover the shipping screw holes.
F Install the top mounting rail with 4 type A
screws from the inside of the case. Press
firmly to drive the screws into the gasket
and through the top mounting rail.
Top mounting rail