Publicidad
Idiomas disponibles
Idiomas disponibles
• Press the MODE button several times until the COOL operating mode's LED lights up.
• Press the Up/Down button to set the temperature displayed on the screen. The temperature
can be set between 16°C and 32°C.
• Press the SPEED button repeatedly until the desired speed's display lights up.
• The inner ventilation louvre is adjusted manually to control the direction of the air flow
horizontally.
Note: The system is switched off when the room temperature is lower than the selected
temperature.
B.
VENTILATE ROOM
• Press the MODE button several times until the FAN mode LED lights up.
• In ventilation mode, the room air is circulated but not cooled.
• The desired fan speed can be selected by repeatedly pressing the SPEED button.
C.
DRYING THE ROOM
• Press the MODE button on the control panel or remote control. The LED for DRY mode lights
up. The fan speed cannot be adjusted. The user should connect the hose to the drain outlet
on the underside of the unit.
Note: In this mode, the fan speed is switched to a low speed and cannot be adjusted.
D.
SLEEP MODE (only with remote control)
The energy-saving and sleep mode can be activated in cooling mode.
• In cooling mode:
After 1 hour, the preset temperature is increased by 1°C, and by a further 1°C an hour later.
4.2.3 TIMER SETTING (1 HOUR – 24 HOURS)
The timer can be operated in two different ways:
To switch off
(When the power is
switched on)
To switch on
(When the power is
switched off)
Cancel the timer
4.2.4 AUTOMATIC DEFROSTING
Ice can form on the evaporator during operation at low room temperatures. The unit starts
defrosting automatically and the POWER LED flashes.
This process can take up to 30 minutes depending on environmental conditions.
4.2.5 CONTROLLING THE UNIT USING THE TUYA APP (MZKA2600 only)
The device can be controlled using the Tuya Smart Life app, via Alexa, or via Google Home.
Use is subject to a separate license agreement with the developer. This requires a device that can
run the app and supports Bluetooth 4.0, as well as an internet connection over 2.4 GHz or 5 GHz
WLAN or mobile data. To find out if the app is compatible, search for 'TUYA' in the iOS App Store
or Google Play Store. Standard rates for data and messaging services may apply.
Press the Timer button to
switch on the timer
function
Press the Timer button to
switch on the timer
function
Repeatedly press Up/Down until the LED shows '00'.
Note: Pressing the POWER button will also end the timer setting.
31
Press Up/Down repeatedly to
set the delay until the switch-
off time
Press Up/Down repeatedly to
set the delay until the switch-
on time
www.DEUBAXXL.de
Publicidad
