It is important to maintain your product properly so that it does not deteriorate.
A steel structure has the advantage that you don't need to invest in products or equipment that are
too specific.
All you need is :
- A soft sponge ;
- A microfibre cloth;
- And a water jet.
After cleaning, rinse with clear water (you can use a jet, if it is not high pressure). Don't forget to
rinse the feet as well so that no dirt remains.
Finally, you can finish your work by wiping the structure with a microfibre cloth to dry it and restore
its brilliance.
- Do not use abrasive products or detergents (bleach, acetone, etc.) which could damage the steel.
- Do not use a hard bristle brush, which could also damage the structure.
- Do not use a high-pressure jet.
For the fabric, remove it from the frame, unfold it and spread it out on the lawn or patio (avoid
stony surfaces which could damage it).
Brush or sweep the area to remove any accumulated dirtiness such as dust, leaves etc.
Use a soft sponge with warm soapy water to remove any stains and dirtiness that have remained.
Finally, let the fabric dry completely.
We recommend cleaning your fabric 3 to 4 times a year.
To avoid the appearance of moisture and mould, we recommend that you store your fabric in a
closed and dry place during the autumn and winter seasons.
1/ Produit
Propriétés
Pour usage extérieur uniquement.
L'armature est composée de pièces en acier, matériau reconnu pour sa durabilité, sa robustesse et
résistant aux intempéries les plus fortes. Il peut durer des d'années sans aucune intervention.
Le toit est en polyester. Il s'agit d'un tissu synthétique qui offre une très bonne résistance, une
bonne élasticité. Ce tissu a également l'avantage de ne pas se froisser.
Assemblage
La fabrication puis l'assemblage de ce produit nécessite de laisser un jeu d'ajustement entre les
différentes pièces.
Par conséquent, des écarts allant jusqu'à plusieurs millimètres sont généralement observés entre les
deux composants.
Conseils d'entretien
FR
27