Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL SAFETY RULES
Your pallet truck is made of high quality steel
and is designed for the horizontal lifting and
transport of loads on a pallet or standardized
containers on a level, fixed base. For your safety
and correct operation, please carefully read this
instruction before using it.
1. The waste packages should be sorted and put
into solid dust bins according to the materials
and be collected disposal by local special
environment protection bureau. To avoid
pollution, it's forbidden to throw away the
wastes randomly.
2. To avoid leaking during the use of the
products, the user should prepare some
absorbable materials (scraps of wooden or
dry duster cloth) to absorb the leaking oil
in time. To avoid second pollution to the
environment, the used absorbable materials
should be handed in to special departments
in terms of local authorities.
NOTE: All of the information reported herein is
based on data available at the moment of print-
ing. We reserves the right to modify our own
products at any moment without notice and
liability in any sanctions. So, it is suggested to
always verify possible updates and changes.
WARNING: read and understand all instruc-
tions. Failure to follow all indications listed be-
low, may result in electric shock, fire and/or seri-
ous personal injury.
SAVE THESE INSTRUCTIONS.
SAFETY IN WORKING AREA
Keep your work area clean and well lit. Clut-
tered benches and dark areas may cause acci-
dents.
Keep away observers, children and visitors
while operating a power tool. Distractions can
cause you to lose control.
PERSONAL SAFETY
1.
Operator should read all warning signs and
instructions here and on the pallet truck
before using this truck.
2.
Do not use on a slopping ground.
3.
Do not operate a pallet truck unless you are
familiar with it and have been trained or
authorized to do so.
4.
Do not operate a pallet truck unless you
have checked its condition. Give special
attention to the wheels or rollers, the draw-
bar unit, the fork unit, the lever plate, etc. .
E N G L I S H •
5.
To pull the truck, always move the control
handle
into
the
makes the draw-bar easier to move and
depressurizes the pump section of the
hydraulics. This preserves the hydraulic seals
and the valve components. A long service
life can be expected.
6.
Do not take up any people on the pallet
truck.
7.
The operator had better take on gloves for
labor protecting.
8.
When the goods have been transported, all
people should be away from the forks for
600 mm.
9.
Do not load goods like fig. 5/B .
10. Do not load over maximum capacity.
11. At others special condition or place, the
operator should be carefully to operate the
pallet truck.
U s er 's M an u al
drive
position.
Fig.4
Fig.5
This
7
Publicidad
