Drawer B500-165 - Without Lock - ACD GRUPPE MAX US Información Del Producto Y Manual De Usuario

Adjust the position of the rubber pads as follows:

Unscrew the nuts of the rubber pads on the bottom of the printer tray.

Insert the rubber pad in the desired hole.

Reattach all the nuts to the rubber pads and tighten them securely.
Figure 13: Printer mounting bracket rear
1.10 Drawer B500-165 – without Lock
The drawer is used to store and transport a large number of small parts.
Figure 14: Drawer B500-165 – without lock
MAX_Product_Information_&_User_Manual_Accessories_
Información_del_producto_y_manual_de_usuario_Accessorios_FCC_V1.00_en_es
Do not load the inside of the drawer over 33 lb!
Do not load the drawer over the permitted weight of 132
lb!
10 / 49