Publicidad
Idiomas disponibles
Idiomas disponibles
If you have any questions for the required mounting material, please contact your local specialty
store for advice.
WARNING: You are responsible for ensuring that the wall structure and fasteners are capable of
supporting the panels and shelves, including all components. Check the rigidity of the installation
before installation and if in doubt, consult qualified professionals.
Do not overload the shelves. Do not place or support objects against or on the shelf.
WARNING! Do not exceed the maximum load capacity specified as this may result in damage or
serious injury.
Max. Total load 36 kg
•
Max. Load per shelf 7 kg
•
Max. Load per hook 1 kg
•
INTENDED USES
When mounted correctly, the tool holder is used for the clear storage of light objects with a
maximum total weight of 36 kg. The maximum load on each hook is 1 kg, and the maximum load
on the shelf is 7 kg.
Use the product only for the purpose it is intended for. The manufacturer accepts no liability for
damage caused by unintended use. Any modification to the product may negatively impact
safety, cause hazards and invalidate the warranty.
Only suitable for domestic use; not for commercial use.
UNPACKING INSTRUCTIONS
Open the box and remove the product.
After unpacking, please check the product for damage and to ensure it is complete. Subsequent
complaints cannot be accepted.
This product is subject to strict tests and standards according to the EU guidelines, to ensure that
we can offer you a product that is absolutely harmless to your health. Nevertheless, it can produce
a slight odor, but this does not pose any health risk to you. It is recommended that the produ ct
be installed in a well-ventilated environment. The odor will disappear after a short time after the
product has been removed from the packaging.
ASSEMBLY
(Illustration graphics page 20-22)
1.
Prior to assembly, align the panels so that the compartment slots face upward to ensure
that the compartments/brackets can be placed the correct way around.
2.
Place each panel against the mounting surface and level it with a spirit level.
3.
Make sure the panels are mounted at the correct height, taking into account the selected
shelf position.
4.
Mark as many mounting holes as you need, including the shelf mounting holes, up to a
maximum of 36 kg, depending on the weight to be stored.
6
www.DEUBAXXL.de
Publicidad
