Publicidad
Mounting the Print Server
The print server is a so-called slot card that is simply inserted into the provided slot.
Prepare the printer
Proceed as follows:
1. Turn the printer off.
2. Disconnect the printer's power cord.
3. Remove the screws from the interface cover.
4. Remove the metal cover.
Insert the print server
Proceed as follows:
1. Insert the print server board into the slot until the board locks
into the receptacle.
2. Fasten the print server board screws.
Hardware Installation Guide
All manuals and user guides at all-guides.com
Use KUIO 3,3 Volt Interfaces ONLY!
WILL DAMAGE YOUR PRINT SERVER!
For more information,
please consult your retailer.
THE USE OF A 5 VOLT INTERFACE
13
Publicidad
