Publicidad
Idiomas disponibles
Idiomas disponibles
Preventing the TV from falling
1. Using the appropriate screws, firmly fasten a set of brackets to the wall.
Confirm that the screws are firmly attached to the wall.
– You may need additional material such as wall anchors depending
on the type of wall.
2. Using the appropriately sized screws, firmly fasten a set of brackets to
the TV.
– For the screw specifications, refer to the standard screw part in the
table under "Mounting the TV on a wall".
3. Connect the brackets fixed to the TV and the brackets fixed to the wall
with a durable, heavy-duty string, and then tie the string tightly.
– Install the TV near the wall so that it does not fall backwards.
– Connect the string so that the brackets fixed to the wall are at the
same height as or lower than the brackets fixed to the TV.
Arranging the cables with the Cable Holder
English - 10
Publicidad
