SPM3000 includes Ethernet connection (RJ45), which will allow you to play multimedia files saved in your PC or laptop
using a network cable. To connect the device to your computer or laptop through LAN connection please follow the steps
shown in the picture. If the cable is properly connected, a green and orange LEDs will be turned on in the RJ45 connector
of the device.
12.1 .1 IP Settings
After doing the network connections, you must assign an IP address to your SPM3000. You can assign an IP automatically
or in manual mode. Go to "Settings", "Network" and in "Wired LAN Setup" select the option "IP DHCP (Auto)" to assign
an IP automatically. If you want to configure the network settings in a manual mode select the option "Fixed IP (Manual)".
Auto IP Settings
If the unit is connected to the network through a router and you select the option "IP DHCP (Auto)", the router assigns an
IP automatically to the device as shown in the picture (192.168.158.113). This IP range changes depending on the setup
and the router model.
Fixed IP Settings
Select the option "Fixed IP (Manual)" if you want to setup a Fixed IP as shown in the picture.
Then complete all the required information. Please note the last IP numbers can not match with the rest of IP assigned to
another devices connected through the network; it may cause network problems. For example, if the IP of your computer
is 192.162.158.27, you can assign a new IP to your device only changing the last two numbers (192.168.158.33). You can
only change the last two numbers of the IP address.
Please complete the information "Subnet mask", "Default Gateway" and "DNS Server" with the same values of your com-
puter. Read carefully the sections 12.1.2 and 12.1.3 for further information about how to get this niformation.
Press "Enter" and confirm to saven and apply the changes.
Note:
DHCP means "Dynamic Host Configuration Protocol". It is a protocol which allows a device connected through a network
to obtain a configuration (network configuration) in a dynamic way (automatically, without the needing of the user enter any
information).
A router is a device for interconnection of computer networks that allows secure routing packets between networks or to
determine the route you should take the packet of data
SPM3000 User Guide
Index
1. Welcome
2. Features
3. System Requirements
4. Content
5. Hardware
6. Remote Control
7.
PC Connection
8. TV Connection
8.1 AV Connection
8.2 YPbPr Connection
8.3 HDMI Connection
9. First Time Usage
9.1 Hard disk formatting
9.2 Starter screen
10. Main Menu
10.1 Hard Disk
10.2 USB
10.3 NET
10.4 Playlist
10.5 Settings
11. Basic functions
11.1 Music Playback
11.2 Pictures Playback
11.3 Videos Playback
11.4 Files
11.5 Change output resolution
12. Network function
12.1 Wired LAN Connection
12.2Wireless LAN Connection
13. Share files
13.1 Windows XP
13.2 Windows Vista
14. File access through a network
14.1 My Shortcuts
14.2 My Neighbors
15. Firmware upgrading
16. FAQs
English
31