ON/OFF
ZERO
Technical data
Accuracy:
Measuring range:
Operating temperature:
Operating humidity:
EMC:
Battery:
Backlight:
▪ Sound function - The sound function uses a series of beeps that increase as you approach 0 and 90 degrees. When you
reach exactly 0 and 90 degrees the sound becomes permanent;
▪ HOLD function - locks the measurements at any angle and shows an "H" on the LCD display;
▪ Relative measurements - Set zero at any position;
▪ The level switches off after 5 minutes if you do not press any button;
▪ Backlight - green light turns on when the value changes or buttons are pressed;
▪ Battery - 50 hours continuous working time without backlight and sound function;
▪ LCD display flashes when voltage is below 1.1V.
LCD
HOLD/LIG
HT
MODE/SOUND
0° and 90°: 0.5 mm/m
Other angles: 1 mm/m
°: 4 x 90°
‰: 1000‰
in/ft: 12 in/ft
-10°C up to 50°C
<85%
Class II
DC 1.5V (AAA x1)
Green