Publicidad
Idiomas disponibles
Idiomas disponibles
Pairing the TV to the Samsung Smart Remote
Installing batteries into the Samsung Smart Remote
1. Press the
button at the top rear of the Samsung Smart Remote. The body will pop out slightly from the body
cover.
2. Turn the remote over, and then slide the body of the remote upwards until the battery compartment is revealed.
3. Press the r and l buttons at both sides of the battery compartment to remove the existing batteries.
4. Insert two new batteries (1.5V AAA type) into the battery compartment making sure that the batteries'
polarities (+, -) are oriented correctly. When done, slide the body of the remote back into place.
5. Turn the remote over, press and hold the
into place.
• Alkaline batteries are recommended for longer battery life.
When you turn on the TV for the first time, the Samsung Smart Remote pairs
to the TV automatically. If the Samsung Smart Remote does not pair to the TV
automatically, point it at the remote control sensor of the TV, and then press
and hold the buttons labeled
simultaneously for 3 seconds or more.
button on the top rear, and then slide the body of the remote down
and
as shown in the figure on the left
English - 13
Publicidad
