Usb Operation - AudioSonic HF-1253 Manual De Instrucciones

Playback
• Set the "FUNCTION" selector to "CD / MP3" mode.
• Open the CD door and place a CD / MP3 disc with the label up in
the CD compartment.
• Close the CD door.
• Focus search is performed if disc is inside.
For CD disc - Total number of tracks is read and appears on the display.
For MP3 disc - "MP3" appears on the display.
• Playback will start automatically from the first track.
• Adjust the "VOLUME" control to the desired level.
• Press the "PLAY / PAUSE" button again when you want to stop
playback temporarily.
• Press the "STOP" button when finished.
CD / MP3 OPERATION
Program
• Be sure to press the "STOP" button before use.
• Press the "MODE" button, the display will show "P01" and flash.
• Select desired track by using the "SKIP +" or "SKIP -" button.
(You may select a desired album by pressing the "ALBUM" button)
• Press the "MODE" button again to confirm desired track into the program memory.
• Repeat step 2 and 3 to enter additional tracks into the program memory.
• When all the desired tracks have programmed, press the "PLAY / PAUSE" button to
play the disc in the order you have programmed.
• Press the "STOP" button twice to terminate programmed playback.
Up to 20 tracks fo CD disc, 99 tracks of MP3 disc can be programmed for disc play
in any order.
Mode
Press the "MODE" button before or during playing CD / MP3 disc,
each press switches the mode function as follows:
1 - REPEAT 1
2 - REPEAT ALBUM ( *MP3 ONLY )
3 - REPEAT ALL
4 - RANDOM
5 - NORMAL PLAYBACK

USB OPERATION

General operation
PLAY / PAUSE ( ) Press to start playing tracks from the USB.
Press again to stop playing USB operation temporarily.
Press again to resume playback.
SKIP + & ( ) Press to go to the next track or back to the previous track.
SKIP - ( ) Press and hold while playing until you find the point of
the sound.
STOP ( ) Press to stop all USB operation.
Instruction Manual EN
7