Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Guide
Installation Procedures
Carefully complete the electrical connections.
Check connections before operation.
— — — — — — — — — — — — — — — — — — ——
Reset
Press "
" to flip down the panel. Then
press the " RESET " hole with a pointed object
to reset the unit to restore the system to the
original factory settings.
Installation Opening
This unit can be installed in any dashboard
opening as shown below. The dashboard
should be 4.75 mm - 5.56 mm thick in order to
be able to support the unit.
Installation Procedures
from the car.
2. I n s e r t t h e m o u n t i n g s l e e v e i n t o t h e
dashboard. Fix it firmly in place by folding
down the metal tabs.
3. Perform the required electrical connections.
4. Then check that everything works before
installing the main unit.
5. Remove the two screws on the top of the
6. Install the car radio in the dashboard using
7. Attach the outer trim frame.
If you are not sure how to install this unit
Mounting bolt
Rubber cushion
Remove the
two screws
Mounting sleeve
Main unit
Trim plate
UK-14
Anti-Theft System
T h i s u n i t i s d e s i g n e d w i t h a f l i p - d o w n
detachable panel.
The panel can be detached and taken with
— — — — — — — — — — — — — — — — — — ——
Removing the panel
1
2
you when you leave the car.
Publicidad
