LevelOne GES-2108P Guía De Instalación Rápida página 3

English
Logging on to the equipment
l Connect the RJ-45 interface cable of a switch with a computer using a network cable.
l Set the TCP/IP properties of the computer.
■ Windows
1. Click Start—> Control Panel—> Network and Internet—> Network and Sharing Center—>
Change adapter settings, right click Local connection and select Properties.
2. Double-click Internet Protocol 4 (TCP/IPv4)
3. Set the computer's IP address: The computer's IP address should be any one of the following
free IP addresses 192.168.1.2 ~ 192.168.1.253, and then click OK, to return to the previous page,
click OK.
- 3 -