order to avoid jeopardizing safety.
Disconnect the plug from the outlet before carrying
out any modifications, maintenance or service work.
Keep the heater clean, especially the motor grill and
fan blades.
Store the heater in a dry, clean and safe place, out of
the reach of children.
The heater should be checked at least once a year by
a qualified person.
Regularly check the gas hose and its screw
connections.
Repairs may only be carried out by professionally
trained and qualified persons.
TECHNICAL SPECIFICATIONS
Gas category I 3B/P(30)
Power supply: 230V / 50Hz
Rated heat output: 15kW (51100btu)
Air flow: 300m3 / h
Nominal inlet pressure 300 mbar
Nominal pressure 30 mbar
Gas consumption: 1.07 kg / h
Protection class: IPX4
Fuel: LPG / Propane
Recommended PB bottle size 15kg
The weight of the device is 4.7 kg
Changes reserved!
ENVIRONMENTAL PROTECTIONWASTE
MANAGEMENT
Power tools, accessories and packaging should
be provided for recycling and not to harm the
environment.
Do not dispose of power tools into household waste!
According to Directive 2012/19/EU of the European
Parliament and of the Council on waste electrical and
electronic equipment (WEEE) and its approximation
in national laws, unfit power tools must be handed
over at the point of purchase of similar equipment, or
in available collection points designated for collection
and disposal of power tools. Such disposed power
tools will be collected, disassembled and delivered for
environment-friendly recycling.
WARRANTY
In the attached material, you will find our warranty
conditions.
Date of Manufacture
The date of manufacture is incorporated into the
serial number stated in the product nameplate.
The serial number has the format of ORD-YY-MM-
SERI, where ORD is the number of purchase order,
YY stands for the year of manufacture, MM is the
month of manufacture and SERI means the serial
product number.
44