Publicidad
Idiomas disponibles
Idiomas disponibles
- Connect to the power source with the USB cable provided to
turn the power on. The
blue alternately and turn red within 15 seconds, and the light turns
off to when entering standby mode.
- Place the phone in the wireless charging area, the phone will
commence charging, the indicator light is blue blinking light,
fully charged, blue indicator will remain on.
2.
Fan
The fan has three power levels, short press the on/ off button once
for the first power level, short press again for the second level, short
press again for the third level, and short press a fourth time to turn
off the fan.
3.
Light
Long press the switch to turn on the light and to turn off the light long
press again.
Specifications
Wireless charging:
Input voltage
Output power:
Charging efficiency： ≥75%
Fan:Three levels
Power: 0.5W/0.8W/1.15W
Led Light: 17leds /80 lumens(total)
Attention
1. Please keep the charger away from water or other liquids.
2. If you need to clean the charger, please make sure the power is
off/ disconnected.
3. Operating temperature between 1-45 degrees Celsius.
4. Metal objects placed on top of charging devices might result in
malfunction of the item and damage the charging device. Do not
operate the item on top of any metal worktable or surface.
Charging speed varies with power source rate.
5. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
LED power indicator light will flash red and
DC 9V2A
DC 9V1.1A 10W
when
Publicidad
