Publicidad
Idiomas disponibles
Idiomas disponibles
Output & power supply connector
1 - SPEAKER +: Output connector positive for loud speakers.
SPEAKER -: Output connector negative for loud speakers.
Due to the presence of voltage at the output terminals when the product is turned on,
CAUTION
avoid contact with them. Risk of electric shock.
2 - POWER +: Positive power input for high voltage.
POWER -: Negative power input for high voltage.
Before making any connections to the power terminals, make sure that the negative (-)
CAUTION
of the vehicle battery is disconnected.
3 - FANS: This amplifier has four internal ventilation fans. For perfect functioning, the
amplifier must be installed in a cool and aired place with at least 1" (25mm) space around the
heatsink for proper heat spreading. The usually working temperature of amplifier is 65°C.
The fans and ventilation openings are responsible for cooling the amplifier when it is in
CAUTION
use, so it cannot be obstructed.
Please note: This is a device that will be high voltage powered. As in any electronic
equipment take care to not cause any incident during installation.
We recommend using of well insulated tools.
Cables and circuit breakers should be good quality with its connections well protected and
insulated following the specified gauge.
Wrongly dimensioned wiring may degrade the amplifier performance and causes power loss,
wiring heating and serious risk of fire.
The wiring gauge recommended described in scheme on page 06.
The sale, purchasing or installation of this product by those under 21 years
21+
age is forbidden.
This product is powered by HIGH VOLTAGE. Risk of electric shock.
Danger of Death.
Maximum care should be taken to avoid personal injury while
installing or operation the amplifier.
3
1
2
SPEAKER
POWER
1
3
SPEAKER
HIGH VOLTAGE
05
Publicidad
