Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching and removing bits
→
Slide the insert into the internal hex
drive of the torque screwdriver until it
firmly locates.
→
To remove the insert from the internal
hex drive, hold the screwdriver firmly
by its handle and pull the insert
firmly.
Setting the desired torque
The torque screwdriver might initially be
locked. In this case, you will have to
release the lock first (see page 32).
The torque screwdriver is fitted with a
main scale and a set collar with a
secondary scale.
30
Publicidad
