Chapter V
Trouble Shooting
Phenomenon
The product does not work after
connecting power
After electrifying, "tick" sound
alarm, and the key failed
The motor smells abnormal
It stops during using
Fruit juice contains more pomace
Abnormally noisy and Vibration
Note:
If the problem cannot be solved, do not disassemble the machine without permission. please contact us via
Amazon message or e-mail: support@meomys.com. the above content, if the model or parts change is not in
accordance with the physical, please prevail in kind, without prior notice, please understand!
07
Reasons
1. The power cord is not inserted in
place
2. Continuous working time is too
long, and intelligent protection
begins
Abnormal signal detection of PCB
If the motor is new, then it's normal
1. Add too much ingredients,
overload or blocking the machine,
resulting in breakdown
2. Continuous working time is too
long, intelligent protection begins
The screw rod is damaged
1. The inlet tube or screw rod is not
in place and the running balance
is damaged
2. Variable speed worm gear
damage
Trouble shooting
1. Insert the power line in place
2. Stop and use it again after 20-30
minutes
1. Insert the power line in place
2. If still alarm, please contact us
via Amazon message or e-mail:
support@meomys.com freely.
If it still smells bad after using for
many times, please contact us
via Amazon message or e-mail:
support@meomys.com freely.
1. Reduce the amount of
ingredients added, push the bar
when the pressure is not too
large
2. Stop and use again after 20-30
minutes
Change the screw rod
1. Good installation
2. Send it to the repairmen spot