Publicidad
Idiomas disponibles
Idiomas disponibles
height must correspond with the locking teeth on the
Height Locking levers.
5. Carefully turn the Release valve counter clockwise,
slowly, until the Lift Platform locking levers engages
the Height Locking Levers then close the release
valve by turning it fully clockwise until firm resistance
is felt.
6. Secure the mower by setting the parking break,
putting the transmission in gear and chocking the
wheels.
CAUTION: Clear all tools and personnel before
lowering load. Only attachments and/or adapters
!
supplied by the manufacturer shall be used with
this device.
REPLACEMENT PARTS
Not all components of the lift are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence. When ordering parts, give model number, part number and description below.
Call or write for current pricing: phone (816) 891-6390, fax (816) 891-6599 or contact Pro-Lift Customer Support.
10939 N. Pomona Ave., Kansas City, MO 64153.
Model PL5350Q
7. To lower the lift Platform, release the mower's parking
brake, place transmission in neutral and remove
chocks carefully. Pump the lift Pedal several times to
disengage the Height Locking Levers. Carefully turn
the Release valve counter-clockwise, slowly, but no
more than 1 turn from the closed position, to lower
the load slow and safe.
WARNING: The Lift Handle is used to operate the
Bottle Jack Release Valve. Exercise caution when
!
adjusting the Release Valve raise and lower load
slowly and carefully.
Item
Part No.
No.
1
PL5300Q-K01
2
PL5300Q-K02
3
PL5300Q-K03
4
PL5350Q-K04
5
PL5350Q-K05
6
PL5300Q-K06
7
PL5350Q-K07
-
PL5350Q-K08
Figure 9: Exploded parts view
5
Description
Bottle Jack
Foot Pedal
Handle
Left Wheel Basket Assembly
Right Wheel Basket Assembly
Roller Assembly
Height Lock Lever Assembly
Hardware Kit (not shown)
Publicidad
