Max STORM 4 Manual Del Usuario página 7

• When you need to switch the dust collector off, pull the plug, not the
electrical cord.
• Do not use it with wet towels and water.
• Do not use the cable as a handle for carrying.
• Disconnect the dust collector from the outlet during every bag handling
operation.
Care
Keep the dust collector body clean. Regularly remove dust from the blades and
the base of the fan impeller using a soft brush or compressed air. Do not use
solvent or other aggressive liquids (e.g. lacquer removal liquid) to clean the
device.
The dust collector includes a multi-layer filter bag for collecting dust. Its purity
determines the efficiency of the device. Clean dry bag must be used for the dust
collector to provide correct functioning.
Change the filter bag for a clean one before starting the working day. Wash
the bag to clean it from dust. Manual or delicate machine washing with water
temperature of not more than 40 degrees is permitted. During active operation it
is recommended to change the filter-bag at least once a day. Service life of bag
is 1.5-2 months.
Specifications
• Airflow: up to 96 CFM (up to 164,64 m
• Noise: up to 45 dB.
• Mains voltage: 220 V.
• Frequency: 50/60 Hz.
• Impeller speed: up to 3100 rpm.
• Maximum capacity: up to 32 W.
• Dimension: L*W*H 270*290*150 mm.
• Weight: 1.1 kg.
ENG
WHAT IS THE RISK OF INCORRECT MAINTENANCE
OF THE FILTER BAG?
Watch the video youtu.be/AqJIDO8xMOs
QR code link
KEEP THE DEVICE CLEAN.
The neatness of your equipment will emphasize your
professionalism in the eyes of your clients.
/h).
3
7