Descargar Imprimir esta página

Westfalia Automotive SIARR 8900 Instrucciones De Montaje Y De Servicio página 71

Dispositivo de remolque

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
2.
All: The vehicle's gateway has to be coded as follows using a service tester to extend its functionality to the use of a
towing hitch:
Address word "19", diagnosis interface for data bus.
Select function 007 coding (service $1A) "reading/writing long code".
o
3.
Passat, Octavia, Leon: On vehicles equipped with a VW parking distance control, a service tester must be used to
extend the functionality to the use of a towing hitch as follows:
Address word „76" Parking distance control.
Select function „07", coding the control unit.
o
4.
Golf, Golf Plus, Jetta, Touran: Adapt the PDC offset value on vehicles equipped with a VW parking distance control:
Address word 76 (Parking distance control)
Adaptation
o
5. For vehicles from model year 2008 fitted with Park Distance Control II or Park Assist, code the control unit in the self-
diagnosis using the VAS tester:
Address 10 (Park Distance Control or Park Assist)
08 Code the control unit
o
Change the code value: Byte 0 Bit sample xxxxxxx1 (x: enter the available values in the entry field).
6. For vehicles from model year 2010 fitted with Park Distance Control II or Park Assist, code the control unit in the self-
diagnosis using the VAS tester:
Vehicle self-diagnosis
-
10 park distance control II
o
7. Golf V, Golf Plus, Jetta, Touran, Tiguan, Octavia, Leon, Superb: On vehicles that were built on or after 6th June
2005 and that are factory-equipped with a control unit supporting a trailer stabilisation, the activation of this function
is mandatory.
To this end, adapt the anti-lock braking system control unit –J104 as follows, using the "Guided error location".
Guided error location
Select vehicle
o
Go to "Function component selection"
Chassis
o
If this adaptation option is not included in the control unit menu, trailer stabilisation is not supported by the control unit
used or automatically activated.
Select address word „69", trailer function.
Change to „Coded".
Continue the coding according to the menu.
o
Set the value of the 5thdecimal place (from the right) from "0" to "1" (XX1XXXX).
Function „06" Exit output.
Channel 2
0–30 cm (recommend value: 11 cm)
-
To do this, switch to entry mode [BIN].
008 coding
Master
008 02 clear text encoding
>Continue (vehicle system test)
> Continue
Brake system
01 – Systems with self-diagnosis capability
Anti-lock braking system
o
321 600 391 101 - 023
Function „06" Exit output.
trailer
hitch detachable
-
Functions
Adaptation-J104 with trailer stabilisation
Continue as indicated in the menu.
o
71

Publicidad

loading

Este manual también es adecuado para:

Siarr 8900 13b321 600 300 107321 600 300 113