Publicidad
3
Install in a clean, dry, and safe environment.
Pull the smaller tube of the tube assembly (A) so the entire assembly measures
2 inches longer than your distance on page 2. If necessary, untighten the rod by turning the
larger tube counterclockwise and the smaller tube clockwise, then adjust the length, Fig. 3-1.
Lock the assembly (A) by twisting the smaller tube in the direction of the arrow, Fig. 3-2.
Place the top of the unit against the ceiling in the desired location. Compress the unit up
and move the bottom end into place so that the unit is in a vertical position, Fig. 3-3. Make
sure the assembly is in place, vertical, and secure.
Fig. 3-1
UNLOCK
4
Attach shelves (C and D) onto the shelf brackets, Fig. 4-1. Attach organizer cup and soap
dish in the desired location, Fig. 4-2.
Adjust shelves by lifting the lever and moving the shelf brackets up or down.
C
3
Fig. 3-2
Pull 2 in. longer
Twist until tight
A
LOCK
Fig. 4-1
shelf bracket
B
C
Fig. 3-3
A
Fig. 4-2
B
E
F
1-800-892-3986
IS20181-I
Publicidad
