Publicidad
2.11.2 Installing Windows
2.11.2 Installing Windows
2.11.2 Installing Windows
2.11.2 Installing Windows
2.11.2 Installing Windows
RAID F
RAID F
RAID Functions
RAID F
RAID F
unctions
unctions
unctions
unctions
If you want to install Windows
SATAII HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows
Using SATA / SATAII HDDs with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [AHCI].
STEP 2: Install Windows
®
Insert the Windows
Vista
to boot your system, and follow the instruction to install Windows
Vista
TM
64-bit OS on your system. When you see "Where do you want to install Windows?
" page, please insert the ASRock Support CD into your optical drive, and click the "Load
Driver" button on the left on the bottom to load the AMD AHCI drivers. AMD AHCI drivers
are in the following path in our Support CD:
(There are two ASRock Support CD in the motherboard gift box pack, please
choose the one for Windows
.. \ I386 (For Windows
.. \ AMD64 (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
2 6
2 6
2 6
2 6
2 6
ASRock
Vista
Vista
Vista
Vista
Vista
® ® ® ® ®
TM
TM
TM
TM
TM
®
TM
Vista
or Windows
Advanced screen
®
Vista
TM
/ Vista
TM
64-bit OS on your system.
Advanced screen
®
TM
TM
Vista
/ Vista
64-bit OS on your system.
TM
®
TM
/ Windows
Vista
64-bit optical disk into the optical drive
®
Vista
TM
/ Vista
TM
64-bit.)
®
Vista
TM
OS)
®
Vista
TM
64-bit OS)
®
TM
Vista
/ Windows
A785GM-LE/128M
/ Vista
/ Vista
/ Vista
64-bit Without
64-bit Without
64-bit Without
/ Vista
/ Vista
64-bit Without
64-bit Without
TM
TM
TM
TM
TM
®
TM
Vista
64-bit on your SATA /
Storage Configuration.
Storage Configuration.
®
TM
Vista
/ Windows
®
TM
Vista
64-bit optical disk into
Motherboard
®
Publicidad
