Home & Comfort STB8LB Manual Del Propietário página 18

Installation
Step 1: Fix the garbage bag
Secure the excess edge of the garbage
bag with the ring.
Step 2: Install batteries
Open the battery case. Install 2 x AA
batteries into the case in
accordance with the picture
instruction. Close the cover of the
battery case.
Step3: Switch on
Press the button on the left side of the
lid for 3 seconds. The lid function is
activated after the green light in the
induction screen quickly flashes three
times.
Step 4: Sensor function
When garbage or any part of
youbody is approaching the sensor
area (about 15 to 25cm from the
sensor area), the lid will open
automatically. After leaving this
sensor area for 5 seconds, the lid
closes automatically.
18
EN