VULTECH BC-01 Manual De Instrucciones página 7

Default settings of the product:
The USB barcode scanner BC-01 VulTech® is set with default settings that allow you to
install or repair all the most important features.
These settings have the pre-loaded reading of the most important formats of existing
barcodes, such as:
Code 25, Code 39 (
GS1-128 (
UCC/EAN-128)
In order to activate it, it might be enough to read the "Default Settings" code
After this procedure, the barcode scanner will utter a sound lasting 3 seconds.
Now the scanner will be ready to use.
It is possible to modify the settings of the scanner and increase the list of the barcodes to
be identified at any time. The complete guide is available on the website www.vultech.it
and it can be downloaded for free from the relevant section.
Shown below all the "fast setting" settings to set the scanner according to its own
standards:
Choose Interface:
USB
Scan Mode :
Manual with automotic reading
NOTICE:
The manual scanner with automatic reading permites to read the barcodes without
pressing any key; all you need to do is putting in contact the product with the scanner's sensor.
To modify that function and move to the manual function without any automatic reading, just press
the key for 8 seconds; the scanner will automatically utter a sound signal that confirms the changes.
It is possible to move from a mode to the other whenever you want.
farmaceutico italiano
, JAN, MSI
Default Settings
Show the Firmware version
), Code 93, EAN-13, EAN-8,
.
RS-232
Multiscan no trigger (Laser ON)
6
keyboard Emulator