Publicidad
Idiomas disponibles
Idiomas disponibles
EN
I. Operation instructions "*" and "#" are the same function keys
1. In the case of the door opened, insert 4 AA batteries
2. Two sets passwords can be set. The unified personal password of the factory is "159",
and the manage code is empty. Restore the factory settings within half an hour of
power failure;
3. Each time you press the number key, the buzzer beeps once to indicate that the key
input is recognized.
4. Any button is pressed for 10 seconds and then entered without continuous key input will
go to sleep.
5. Once you go to sleep, all previous operations are terminated, and press any key to
wake up to enter the function operation.
II. Change the personal password
1. In the case of the door opened, press the red setting button on the inside of the door,
the buzzer beeps twice, and the yellow indicator light is on, it means that the personal
password starts to be set.
2. Enter your 3-8 digit personal password and press the "#" key or "*" to confirm, the
buzzer beeps twice, and the yellow indicator light goes off to indicate the password is
set or changed successfully; If you set incorrectly, the buzzer beeps 3 times and
yellow light flashes 3 times.
For example: press the escape key → enter 159→ press "#"
III. Change the manage password
1. In the case of the door opened, press the number key "0,0" and then press the red
setting button on the inside of the door, the buzzer beeps three times, and the yellow
indicator light is on, it means that the manage password starts to be set.
2. Enter 3-8 digit manage password you formulated and press the "#" key or "*" to confirm,
the buzzer beeps twice, and the yellow indicator light goes off to indicate the individual
password is set or changed successfully; If you set incorrectly, the buzzer beeps 3
times and yellow light flashes 3 times.
For example: enter 00→ press the escape key→ enter 88888888→ press "#"
IV. Open the door
1. After entering the correct personal password, press the "#" key or "*" to confirm, the
buzzer beeps twice, the electromagnet is closed for 6 seconds, and the green prompt
light is on, which can open the door.
2. If the password is entered incorrectly, press the "#" or "*" key, the buzzer beeps three
times, and the yellow light flashes three times.
3. If enter wrong passwords three times in a row, the keypad will be locked for 20 seconds
and the buzzer beeps for 20 seconds. If enter wrong passwords 3 times again, the
keypad will be locked for 5 minutes and the buzzer beeps for 5 minutes. During the
locked period, every time you press the button, the yellow light will turn on for 1 second
and then turn off.
V. Under voltage prompt
When turned on, the red indicator and green indicator on the panel light up at the same
time, it's a reminder that the battery is under voltage, please replace the battery in time.
Publicidad
