Publicidad
Idiomas disponibles
Idiomas disponibles
1. Connect a suitable adapter (14V 3A) to the DC input of the photo light.
2. Connect the adapter to an appropriate power source.
3. Set the power switch on the photo light to "II".
4. The LCD lights up, the photo light is ready to use.
» Switch off the photo light
1. Set the power switch to "0".
2. The photo light turns off.
Using the photo light
1 WLAN (Icon)
2 MODE
3 DIM/Fn1
4 Fn2
5 Fn3
6 SET
7 POWER
8 DC
Light Selection
You can choose between three modes: WHITE LIGHT > COLOR LIGHT > SCENE.
» White Light (CCT)
Activate:
Use the MODE button to change the WHITE LIGHT CCT mode.
Adjust brightness:
Press the DIM/Fn1 button to select the BRIGHTNESS parameter.
Then use the SET knob to adjust the brightness.
Set color temperature:
Press the Fn2 button to select the color temperature (COLOR TEMPERATURE) parameter.
Then use the SET knob to adjust the color temperature.
Press this button to enter Channel (CH), Group (GR) and ID settings.
Press this button for WHITE LIGHT CCT mode selection, COLOR LIGHT HSI
mode selection and SCENE FX mode selection.
Press this button to select the desired parameter for the selected mode.
Press this button to select the desired parameter for the selected mode.
Press this button to select the desired parameter for the selected mode.
Use this knob to adjust the selected parameter.
Mains switch: I = battery operation, II = mains operation
DC input for mains operation
- 8 -
Publicidad
