18.
If the appliance has a mobile socket, it must be removed before cleaning. The base of the
connector must be dried before using the appliance again. Only the appropriate mobile
socket should be used.
19.
Never connect the hair straightener to an outlet where the voltage does not match.
20.
Never leave unattended during use.
21.
The appliance operates at very high temperatures when in use, take special care not to bring
it close to the skin of the neck and face.
22.
Do not wrap the cable around the plates.
Method of Use
Keep the ON / OFF button pressed until the appliance is turned on, then press 1 time to
1.
change the selector to the desired temperature each time. (Low temperature for fine hair,
medium temperatures for normal and high temperature for thick hair).
Hair must be dry and tangle-free before using the straightener.
2.
You can use sprays or serums to enhance the shine of your hair.
3.
Divide the hair into manageable sections and clip the upper layers of the head. Work with
4.
the bottom layers first.
Take a small section of hair, pull down and away from your scalp, and hold it taut.
5.
Hold the hair firmly between the plates and glide the straightener through the hair, from the
6.
roots (without touching the scalp) to the ends smoothly and firmly.
Do not stay with the straightener in the same area for a period longer than 2 or 3 seconds to
7.
avoid damaging your hair.
8.
To create curves or movements, turn your wrist towards your head or away from your head
while sliding the iron through the hair.
9.
Repeat with all sections of your hair, working with the bottom layers first, then the top and
sides to finish.
10.
When you have finished combing, press and hold the ON / OFF button until the appliance
turns off and let it cool down before storing.
Environmental Protection
Waste electrical production should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.