Oliso M3PRO project iron Manual De Usuario página 3

step 1
unplug
Press the standby button so light
turns red before unplugging
Max fill line
Do not fill the tank past the MAX fill line. Close the lid tightly when done.
Be careful when filling a hot iron, if water overflows,
dry the iron with a cloth before plugging back into the outlet.
It is best to empty the water tank after ironing,
let the iron cool before emptying.
fabric selector
Turn the fabric selector to the
desired setting.
settings temperature + fabric
Low temperature
for synthetic fabrics
Medium temperature
for wool + silk.
High temperature
for cotton + linen.
filling water tank
step 2
open cover
Place iron on Solemate™ to cool.
Then open the cover
fabric selector
light
position
Standby
Horizontal
On heel
Water Use
This iron is designed for tap water use.
If you have very hard water,
we recommend using inexpensive bottled
spring or purified water or mixing half tap
water with half distilled water.
status lights
Standby Fabric
indicator
Selector
RED OFF
PULSING - heating
GREEN
SOLID - ready
PULSING - heating
GREEN
SOLID - ready
RED OFF
30 minutes when vertical.
step 3
fill
Carefully fill the water tank.
Max capacity. 1.7fl oz (50mL).
Note: fill cup not included.
Steam Status
Prolight
(only ••• setting)
OFF OFF
ON
ON
Flashes when
ready
tilted
ON
OFF
ready
OFF OFF