Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY & OPERATION
NOTE: Before using the tool, read the
instruction book carefully.
WARNING: This battery harness can only be
used with Kress cordless handheld tools.
BEFORE OPERATION
Note: Check the Kress batteries carefully to make
sure that no parts are damaged or missing. If any
damage occurred, please contact Service Agent.
OPERATION
Adjusting height of Frame(See Fig. A1,A2)
A1
1
EN
A2
2
1
Note: It is possible to adjust frame height based on
user height &weight. The Kress harness features
three height(S/M/L) for your choice.
1. Depress the button and release the slider from
the frame;
2. Find the suitable height, match the "-"symbol
as shown, fit the slide and lift up to finish the
assembly, and you should hear a "click".
Install/Remove the battery pack (See Fig.
B1, B2,B3)
6
1
B1
1
2
B2
1
B3
2
1. Align the battery pack to the battery mounting
base, then slide it into the base to install the battery.
2. Press the battery pack release button, then lift the
battery pack along the mounting base to remove the
battery.
Fix the cable into harness positions.(See
Fig C)
1
2
Publicidad
