Descargar Imprimir esta página

Harbor Breeze WL132WW Manual Del Usuario página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY INSTRUCTIONS
5.
Temporarily place fixture (A) over mounting plate
(AA) to determine amount of adjustment necessary
for fixture screws (CC). NOTE: Fixture screws (CC)
should come through holes in fixture (A) just
enough so decorative nuts (DD) fit flush against
fixture (A) when mounted. Once fixture screws (CC)
are adjusted, use pliers (not included) to tighten
nuts (EE) securely against mounting plate (AA).
Set fixture (A) aside.
Hardware Used
AA
Mounting Plate
[not shown actual size]
CC
Fixture Screw
DD
Decorative Nut
Nut
EE
Prepare wire by stripping 3/4 in. of insulation from
6a.
wire ends using wire strippers (not included).
5
DD
x 1
x 2
x 1
x 2
6a
7
Outlet Box
AA
A
CC
EE

Publicidad

loading

Este manual también es adecuado para:

Wl132mbk20620032602004