Publicidad
Idiomas disponibles
Idiomas disponibles
Setup
Connecting the Device to ZSmart App
Step 1: Download the App and Register Your Account
Search for the ZSmart App in Apple App Store or Google Play Store and
download the App to your smartphone.
Open the ZSmart App and log in with your account. If you do not have an
account, create an account with your phone number or Email ID.
Step 2: Power on the Device
1.
Open the silicon cover at the bottom of the camera.
2.
To power on the device, press and hold the Power Button for 5 seconds
until you hear a sound prompt and the Working Status LED blinks red
slowly, indicating that Pairing Mode is active.
Note: If the device doesn't display the above status, press and hold the
Reset Button for 5 seconds until you hear a sound prompt "Bugu".
Step 3: Add the Device to the App
1.
Open the app, tap the "+" button on the top right corner of the interface,
and then select the "Add Device" option. Select the "Smart Camera"
option and then choose the corresponding model purchased.
2.
Select "Next" if you have completed the above steps on the interface.
Select the desired Wi-Fi and enter the correct password. Then tap the
"Next" button.
6
Publicidad
