Página 1
DA6580 (Espresso), DA6580W (White), DA6580GR (Gray) Loft Bed Twin Weight Limit : 200 Lbs / 91 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
Página 2
Limited 1 year Warranty Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship ● Work in a spacious area and near where the unit will be used, preferably on a and agrees to remedy any such defect. This warranty covers one year from the carpet, or use a piece of the cardboard packaging to protect your floor and date of original purchase from authorized retailers.
Página 3
WARNINGS - Loft Bed: Twin ● STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are not designed for use with the bed; for example, but not limited to, hooks, belts and jump ropes. ●...
Página 5
PARTS LIST LEFT FRONT POST LEFT BACK POST RIGHT BACK POST RIGHT FRONT POST 1 PC 1 PC 1 PC 1 PC HEADBOARD CROSS HEADBOARD CENTER CROSS HEADBOARD CENTER CROSS HEADBOARD PANEL 6 PCS 1 PC 1 PC 4 PCS SLAT FRONT SIDE RAIL BACK SIDE RAIL...
Página 6
PARTS LIST LONG GUARDRAIL SHORT GUARDRAIL LEFT LADDER END RIGHT LADDER END 1 PC 1 PC 1 PC 1 PC GUARDRAIL LEG LADDER STEP SHORT GUARDRAIL POST DESK PANEL 2 PCS 5 PCS 1 PC 1 PC...
Página 7
PARTS LIST DESK BACK RAIL BOTTOM BACK GUARDRAIL BOTTOM BACK SIDE RAIL SUPPORT POST 1 PC 1 PC 1 PC 1 PC Each part has a unique part number. Please reference the appropriate part number when contacting customer service for replacement parts.
Página 9
HARDWARE LIST Ø 1/4" x 100mm Ø 6.5mm x 48mm JOINT CONNECTOR (4mm HEX HEAD) WOOD JOINT CONNECTOR (4mm HEX HEAD) 12 PCS 12 PCS Ø 6.5mm x 100mm Ø 4mm x 35mm Ø 11.8mm x 15mm WOOD JOINT CONNECTOR (4mm HEX HEAD) FLAT HEAD SCREW BARREL NUT 26 PCS...
Página 10
6 PCS 2 PCS 12 PCS Hardware Pack Please do not completely tighten all the hardware, DA6580 (Espresso), HP#: TDA6580-01 until the entire assembly is complete, unless DA6580GR (Gray) otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are...
Página 11
Step 1 One of the panel H has a label on it, Use it during this step. Insert wood dowels (7) into the ends of the cross Ex3, cross F. Attach posts A & B to the crosses using the wood joint connectors (3) as shown.
Página 12
Step 2 Insert wood dowels (7) into the ends of the cross Ex3, cross G. Attach posts C & D to the crosses using the wood joint connectors (3) as shown. Use Allen key (8) to tighten the wood joint connectors (3).
Página 13
Step 3 Do not fully tighten bolts in this step, this will assembly in the following steps. Insert wood dowels (7) into each end of the M & U & V & K. Attach the M & U & V to posts B & C, and secure using joint connectors (3).
Página 14
Step 4 Insert barrel nuts (5) into rails I & J & W as shown. Attach the rails I & J & W to the posts B & C, A & D using the joint connectors (1).
Página 15
Step 5 Insert wood dowels (7) in the ends of short guardrails N, Attach short guardrails N to post A with wood joint connectors (3). Insert wood dowels (10) in the ends of short guardrails N, Attach short guardrails N to post S with wood joint connectors (11).
Página 16
Step 6 Attach the support post X to rail U & V & W with joint connectors (9).
Página 17
Step 7 Insert wood dowels (7) into the K & U & X as shown. Attach the L shaped metal plate (14) with flat head screws (13) to the U & X.
Página 18
Step 8 Attach the support post X to desk panel T with joint connectors (13). Attach the desk front rail K to desk panel T with joint connectors (9). NOTE: Fully tighten all joint connector installed in previous steps.
Página 19
Step 9 Attach slats Lx13 to bottom side rails I & J with flat head wood screws (4). Use space block Y to space them out evenly as shown. Use a Phillips head screwdriver (not included) to install all screws.
Página 20
Step 10 Insert wood dowels (7) into the ends of the ladder steps Qx5. Attach ladder ends O & P to ladder steps Q with wood joint connectors (2). Tighten the wood joint connectors (2) with the Allen key (8).
Página 21
Step 11 Attach the guardrail leg R to M & J , N & I with flat head wood screws (6). Attach the ladder to the side rail I with flat head screw (15) as shown.
Página 22
Helpful Hints CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the ● Move your new furniture carefully, with two maximum weights indicated may result in instability or cause possible injury. people lifting and carrying the unit to its new location.
Página 23
Lea antes de comenzar a ensamblar ●Llame a nuestro número gratuito si necesita asistencia. DHP garantiza que este producto está libre de defectos de material y mano de obra y se ●Trabaje en un área espaciosa y cerca de donde su producto será utilizado, compromete a remediar cualquier defecto de este tipo.
Página 24
PRECAUCIÓN - Cama Alta : Individual ● PELIGRO DE ESTRANGULAMIENTO - Nunca cuelgue o ate en la cama artículos que no estén diseñados para usarlos con la cama; por ejemplo, pero no limitado a esto, ganchos, cinturones y cuerdas de saltar. ●...
Página 25
Paquete de componentes Partes Piezas de reemplazo, DA6580 (Expreso), visite www.dhpfurniture.com/spa/replacement-parts #de paquete: TDA6580-01 DA6580GR (Gris) IMPOTRTANTE: La lista de números de piezas que DA6580W (Blanco) #de paquete: TDA6580W-01 aparece a continuación es exclusiva de su producto. Por favor, manténgalo a mano cuando solicite piezas de repuesto.
Página 27
Instrucciones Paso 1 Paso 6 Uno de los paneles H tiene una etiqueta, utilícela durante este paso. Sujete el poste de apoyo X al raíl U & V & W con conectores de unión Inserte los tacos de madera (7) en los extremos de la cruz Ex3, cruz F. (9).
Página 28
Límites de peso: 200 Lbs / 91 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, se requiere de dos personas para levantar y trasladar su producto a su nueva ubicación. ● Sus muebles se pueden desmontar y volver a ensamblar en caso de mudanza.
Página 29
● Si vous avez besoin d’aide, appelez notre service à la clientèle sans frais. DHP garantit que ce produit est exempt de tout vice de matériaux et de fabrication et s’engage ● Travaillez dans un endroit spacieux et près du lieu où l’unité sera utilisée, à...
Página 30
AVERTISSEMENT - Lit Mezzanine : Lit une place ● RISQUE D'ÉTRANGLEMENT - Ne jamais placer ou suspendre des articles sur aucune partie du lit superposé qui ne sont pas conçus pour être utilisés avec ce lit; par exemple, mais n'étant pas limité à, des crochets, des ceintures, et des cordes à sauter. ●...
Página 31
Pièces Quincaillerie Pour des pièces de rechange, visitez: www.dhpfurniture.com/spa/replacement-parts DA6580 (Expresso), #de paquet: TDA6580-01 DA6580GR (Gris) IMPORTANT: La liste des références ci-dessous est propre à votre produit. Veuillez l'avoir sous la main lorsque vous appelez DA6580W (Blanc) #de paquete: TDA6580W-01 pour des pièces de rechange.
Página 32
LISTE DES PIÈCES ÉTIQUETTE DA6580 DA6580W DA6580GR DESCRIPTION DES PIÈCES (Expresso) (Blanc) (Gris) PIED AVANT GAUCHE T1027420 T1027670 T1026970 PIED ARRIÈRE GAUCHE T1027430 T1027680 T1026980 PIED ARRIÈRE DROIT T1027440 T1027690 T1026990 PIED AVANT DROIT T1027450 T1027700 T1027000 TRAVERSE DE TÊTE DE LIT...
Página 33
Instructions Étape 1 du capuchon hexagonal (12), comme indiqué. L'un des panneaux H porte une étiquette, utilisez-la au cours de cette étape. Insérez des chevilles en bois (7) dans les extrémités de la croix Étape 6 Ex3, croix F. Fixez les poteaux A et B aux croix à l'aide des connecteurs Fixez le poteau de support X au rail U &...
Página 34
Limite de Poide: 200 Lb / 91 Kg chaque étage Consejos utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier peut être démonté et réassemblé pourfaciliter les déménagements.