After Frying - weasy TB600 Manual De Usuario

AFTER FRYING

After frying, remove the lid and place the basket at the top to allow the oil to drip off.
l
Carefully lift the basket out off the bowl. If necessary, shake off the excess oil or fat
l
over the deep fat fryer.
Place the fried product in a bowl or sieve (line with absorbent kitchen paper).
l
Switch off the deep fat fryer at the on/off switch and set the thermostat to the lowest
l
level (turn the thermostat fully anticlockwise).
l If the deep fat fryer is not used regularly, it is recommended to store the oil or liquid
fat after cooling in a container preferably in the fridge or some other cool place. Filter
the oil or fat through a fine sieve into the container to remove food particles from the
oil or fat. To empty the deep fat fryer, remove the lid, basket and control/heating
element. Remove the bowl from the deep fat fryer and pour out the oil or fat
l If the deep fat fryer contains solid fat, allow the fat solidify in the deep fat fryer and
CARE AND MAINTENANCE
REPAIRING:
• If there is any breakdown or damage, the appliance
must be repaired by specialized people. Non-
specialized people are not permitted to dismantle or
repair the appliance.
GUARANTEE
This product is guaranteed for 24 months granted. Your warranty is valid if the product is
used in accordance to the instructions and for the purpose for which it was created. In
addition, the original purchase (invoice, sales slip or receipt) is to be submitted with the
date of purchase, the name of the retailer and the item number of the product. For the
detailed warranty conditions, please refer to our service website
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a separation
of this waste product into communities, you will need to inform your local authorities about
the places where you can return this product. In fact, electrical and electronic products
contain hazardous substances that have harmful effects on the environment or human
health and should be recycled. The symbol here indicates that electrical and electronic equipment
should be chosen carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05