ZKTeco C9AP Serie Guía Rápida página 11

Setup
You can connect the device to ZSmart App after verifying that the installation
was successful and the device is turned on. The setup steps are as follows:
Connecting the Device to ZSmart App
Step 1: Download the App and Register Your Account
Search for the ZSmart App in Apple App Store or Google Play Store and
download the App to your smartphone.
Open the ZSmart App and log in with your account. If you do not have an
account, create an account with your phone number or Email ID.
Step 2: Power on the Device
Turn on the power of the device. Wait for a few seconds until you hear two
short beeps, indicating that the Pairing Mode is active.
Note: If the device doesn't display the above status, press and hold the
Reset Button for 5 seconds until you hear an audio prompt.
Step 3: Add the Device to the App
1. Open the app, tap the "+" button on the top right corner of the interface,
and then select the "Add Device" option. Select the "Smart Camera"
option and then choose the corresponding model purchased.
2.
Select "Next" if you have completed the above steps on the interface. Enter
the correct password for the Wi-Fi network that you've selected. Then press
the "Next" button.
10