Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
OPERATION INSTRUCTIONS
SEN5A-ACT - Sensor Commissioning Tool
OVERVIEW
The SEN5A-ACT is a handheld tool for commissioning EiKO sensors remotely. It enables reprogramming the sensors with
just a push of a button, without the need for ladders or additional tools. The tool can store up to four sensor parameter
modes, making it faster to configure multiple sensors. The bidirectional IR communication allows for sending and receiv-
ing sensor settings from a distance of up to 50'. The tool can display existing sensor parameters, copy and transmit new
parameters, and store parameter profiles, providing an efficient solution for projects where identical settings are required
in multiple areas or spaces. Settings can be easily copied across a site or between different sites.
SPECIFICATIONS
Power Supply
Carrying Case
Upload Range
Ambient Operation Temperature
Dimensions
PROGRAMS COMPATIBILITY
The SEN5A-ACT commissioning tool consists of two remote programs: SEN5A-ACT and SEN5A-CT. The SEN5A-ACT program
is used for commissioning new EiKO sensors introduced after 2023. The SEN5A-CT program is used to commission sensors
previously commissioned using EiKO SEN5A/CT and Premise RC-100. Please ensure to check the sensor's compatibility prior
to commissioning, and the best practice is to check prior to installation. Upon powering on the commissioning tool, please
ensure to select the appropriate program based on the sensor.
SEN5A-ACT
SEN5A-SZPR-WH
SEN5A-SZMR-WH
SEN5A-SPPR-WH
SEN5A-SPMR-WH
SENA-SHMR
SENA-SHPR
EiKO Sensor introduced after 2023
1
2 x AAA 1.5V Alkaline Batteries (not include)
SEN5A-ACT in a carrying case (included)
Up to 50ft (15M)
32°F to 122°F (-0°C- to 50°C)
4.84'' x 2.76'' x 0.91''
SEN5A-CT (backward compatible with
SEN5A/CT and RC-100)
BAY-E-SEN/PIR
BAY-E-SEN/M
SEN5A/M/Z10
SEN5A/PIR/Z10
MS2-DPX-3
BRI810-B-D
BRI810LV
©2023 EiKO Global, LLC. World Headquarters: 18000 W. 105
Head Office, Canada: 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673
SEN5A-ACT with Carrying Case
he
Street, 3
Floor, Olathe, KS 66061 1.800.852.2217
th
rd
eiko.com
Rev. 06/01/23
Publicidad
Resumen de contenidos para Eiko SEN5A-ACT
- Página 1 OVERVIEW The SEN5A-ACT is a handheld tool for commissioning EiKO sensors remotely. It enables reprogramming the sensors with just a push of a button, without the need for ladders or additional tools. The tool can store up to four sensor parameter modes, making it faster to configure multiple sensors.
- Página 2 3. Once you have entered MODE1, MODE2, MODE3, or MODE4, you may adjust any parameter as desired. To save the adjusted parameters, simply press the OK button. eiko.com ©2023 EiKO Global, LLC. World Headquarters: 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Head Office, Canada: 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...
- Página 3 Return to the Type Selection menu for remote programs. Return to the Type Selection menu for remote programs. eiko.com ©2023 EiKO Global, LLC. World Headquarters: 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Head Office, Canada: 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...
- Página 4 1. Press DISP button to display the EiKO logo or the latest settings. 2. Select the remote program SEN5A-ACT or SEN5A-CT and press the OK button. If necessary, use EXIT or button to return to the Type Selection menu for remote programs.
- Página 5 Note: When the daylight function is enabled, the DIM TIME must be finite. eiko.com ©2023 EiKO Global, LLC. World Headquarters: 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Head Office, Canada: 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...
- Página 6 3. The luminaire dims to off when daylight is above 100 lux. Note: The luminaire turns on at full brightness after each dimming or power cycle. eiko.com ©2023 EiKO Global, LLC. World Headquarters: 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Head Office, Canada: 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...
- Página 7 Le dispositif de mise en service SEN5A-ACT se compose de deux logiciels de télécommande : SEN5A-ACT et SEN5A-CT. Le logiciel SEN5A-ACT est utilisé pour la mise en service des nouveaux capteurs EiKO lancés en 2023. Le logiciel SEN5A-CT est utilisé pour mettre en service des capteurs précédemment mis en service au moyen du dispositif SEN5A/CT de EiKO ou du Premise RC-100.
- Página 8 3. Une fois que vous avez entré le MODE1, le MODE2, le MODE3 ou le MODE4, vous pouvez modifier n'importe quel paramètre comme vous le souhaitez. Pour enregistrer les paramètres nouvellement modifiés, il suffit d'appuyer sur la touche OK. eiko.com © 2023 EiKO Global, LLC. Siège mondial : 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Siège social, Canada : 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...
- Página 9 Retourne au menu de sélection des types de logiciels à distance. EXIT (SORTIE) eiko.com © 2023 EiKO Global, LLC. Siège mondial : 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Siège social, Canada : 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...
- Página 10 « Auto » pour activer le capteur. 1. Appuyer sur la touche DISP pour afficher le logo de EiKO ou les derniers réglages. 2. Sélectionnez le logiciel à distance SEN5A-ACT ou SEN5A-CT et appuyez sur la touche OK. Si nécessaire, utilisez la touche EXIT ou pour revenir au menu de sélection du type de logiciel à...
- Página 11 DIM TIME (durée de l’assombrissement) doit être finie. supérieure à 100 lux. eiko.com © 2023 EiKO Global, LLC. Siège mondial : 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Siège social, Canada : 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...
- Página 12 Remarque : Le luminaire s'allume à pleine luminosité après chaque cycle de gradation ou d'alimentation. eiko.com © 2023 EiKO Global, LLC. Siège mondial : 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Siège social, Canada : 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...
- Página 13 La herramienta para puesta en marcha SEN5A-ACT consta de dos programas remotos: SEN5A-ACT y SEN5A-CT. El programa SEN5A-ACT se utiliza para la puesta en marcha de nuevos sensores EiKO; introducidos después de 2023. El programa SEN5A-CT se utiliza para poner en servicio sensores previamente puestos en marcha con EiKO SEN5A/CT y Premise RC-100. Asegurar la verificación de la compatibilidad del sensor antes de la puesta en servicio.
- Página 14 3. Una vez que presionó MODE1, MODE2, MODE3 o MODE4 puede ajustar cualquier parámetro que desee. Para guardar los nuevos parámetros, simplemente presione la tecla OK. eiko.com ©2023 EiKO Global, LLC. Sede internacional: 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Oficina central, Canadá: 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...
- Página 15 Volver al menú de selección de tipo para programas remotos. SALIR eiko.com ©2023 EiKO Global, LLC. Sede internacional: 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Oficina central, Canadá: 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...
- Página 16 Auto y activar el sensor. 1. Presionar DISP para visualizar el logo de EiKO o los últimos ajustes. 2. Seleccionar el programa remoto SEN5A-ACT o SEN5A-CT y presionar el botón OK. Si es necesario, utilizar el botón SALIR o para volver al menú...
- Página 17 TIEMPO DE ATENUACIÓN debe ajustarse en finito. diurna es superior a 100 lux. eiko.com ©2023 EiKO Global, LLC. Sede internacional: 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Oficina central, Canadá: 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...
- Página 18 Aviso: La luminaria se enciende a pleno brillo después de cada atenuación o ciclo de encendido. eiko.com ©2023 EiKO Global, LLC. Sede internacional: 18000 W. 105 Street, 3 Floor, Olathe, KS 66061 1.800.852.2217 Oficina central, Canadá: 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673...