3. OPERATION
Light ON
Speed 1 - Light ON
Speed 2 - Light ON
Speed 3 - Light ON
4. MAINTENANCE WARNINGS
• Cleaning: For cleaning, simply use a cloth moistened
with neutral liquid detergents. Do not use cleaning tools or
instruments.
• Avoid the use of abrasive products. DO NOT USE
ALCOHOL!
For product maintenance, see the images at the end
of the installation marked by this symbol.
•
Anti-Grease Filter: The metallic anti-grease filter
must be cleaned once a month with non-aggressive de-
tergents, manually or in a dishwasher on a short wash at
low temperatures. To remove the anti-grease filter, pull
the spring release handle.
• The Anti-Grease Filter traps the grease particles
produced during cooking. When cleaned in the dishwasher,
the metal grease filter may discolour, but its filtering
characteristics remain unchanged.
•
Carbon filter (for filter version only): The cart-
ridge must be replaced at least every four months. It
CANNOT be washed or regenerated. As indicated in the
drawings section: remove the anti-grease filters, apply a
carbon filter on each side and attach it to the product. Put
the anti-grease filters back in place.
• The carbon filter retains any unpleasant odours produced
during cooking. • The saturation of the carbon filter can
occur after somewhat prolonged use depending on the type
of cooking and how regularly the grease filter is cleaned.
Perimeter suction panel (panel maintenance)
•
Disassembly:
a. firmly pull the panel (FRONT SIDE) downwards
b. release it from the rear hinges.
Cleaning: the suction panel must be cleaned manually
using non-aggressive detergents.
Assembly: the panel must be hooked at the back and
secured at the front (with magnets).
OFF
Speed 1 - Light OFF
Speed 2 - Light OFF
Speed 3 - Light OFF
Attention! Always check that the panel is securely fixed in
place.
Illumination
• The lighting system is based on LED technology. LEDs
provide optimal illumination, last up to 10 times longer than
conventional lamps and save 90% of electricity.
• Lighting system : The lighting system cannot be re-
placed by the user, contact Customer Service in case of
malfunction.
4
V.1