Descargar Imprimir esta página

Habitat Ivy 808079 Instrucciones De Montaje página 3

Bajo biblioteca
Ocultar thumbs Ver también para Ivy 808079:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4
EN
This manual contains important information that should be kept
for future reference.
For domestic use only.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Materials
Structure, background, shelves: particle board oak veneer acrylic
varnish.
Doors: acrylic lacquered particleboard.
Assembly Instructions
In order not to lose components, do not throw the pack-aging
before completing the full assembly.
Before beginning assembly, identify all the components using the
manual.
This product must be assembled by an adult.
Plan to assemble the product as close as possible to where it will
be installed.
Assemble on a clean, flat surface.
Do not use an electric screwdriver.
The product cannot be assembled more than one time.
Warning! Before drilling, make sure that no pipes or cables will
be present in the drilling area. Fix the product to the wall to
ensure its stability. Use the type of screws and wall plugs for the
supporting material.
Recommendations for use
This product is designed for indoor use only.
Do not climb the product.
Do not overload shelves.
The wood-based products, particle board, painted, var-nished
and / or lacquers may emit an odor when opened. This smell
disappears after a few weeks if the room is properly ventilated.
Maintenance
Remove dust regularly with a dry cloth.
Clean with a soft, damp cloth. Then wipe with a clean dry cloth.
Wipe up spills immediately with a clean, dry cloth.
To prevent scratching, do not use a sponge or recurrent grains
detergent.
Do not use abrasive products.
The use of special products for the wood is not neces-sary or
recommended.
Do not place the product near a heat source (radiator, fireplace,...)
nor a moisture source. Heat and humidity may damage the
product.
In order not to damage the surface, it is recommended not to
deposit hot items Wet directly.
Clean with movements in the direction of the wood fibers.
Clear scratches with a cloth soaked in red polish.
Keep the label with lot number, it may be useful in case
BC
of complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address: HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
Ivy - 01/2023
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
2

Publicidad

loading