Descargar Imprimir esta página

Publicidad

Enlaces rápidos

MANUAL DE MONTAGEM / ASSEMBLY INSTRUCTIONS / PLANO DE ARMADO
manual de montagem!
Before assembling the furniture, carefully read
the assembly instructions!
manual de ensamble!
Ref.: 3017
excelente qualidade, fabricado com chapa de
atual.
Congratulations! You have purchased a
product of excellent quality, made from MDP
or MDF wood veneer, extracted from
renewable forests. It has high strength and
current design.
excelente calidad, fabricado con placa de
madera de MDP o MDF, proveniente de
florestas renovables. Tiene alta resistencia y
1)
Check all parts before starting
assembly.
Verifique todas las partes antes de
empezar el armado.
ATENTION
2)
When starting the assembly, do not
support the parts on the wall.
A l empezar el armado, no apoyes las
partes en la pared.
3)
When placing parts and hardware aside, be careful
not to lose them.
Al poner las piezas y herrages a parte, cuidado para
4)
The furniture must be mounted on the floor, to do
this, use the box itself to protect and not damage the
floor.
El mueble suele ser armando al piso, para eso, use la
5)
passo.
Begin assembly by following the step-by-step
instructions.
Comience el armado siguiendo la instrucciones paso a
paso.
6)
It's the assembler's responsibility to follow the
instructions in this manual, which are fundamental to the
structure of the furniture.
Es de responsabilidad del armador seguir las
instrucciones de este manual, que son fundamentales
para la estructura del mueble.
1)
com um pano levemente umedecido com
Care and cleaning should be done with
a cloth slightly moistened with water.
CUIDADOS
CARE
hecha con un trapo levemente
humedecido en agua.
CUIDADO
2)
Do not use abrasive products, such as soap,
detergents and steel sponge.
detergentes y esponja de acero.
3)
Do not use wax or oil to shine the furniture.
No use cera o aceites para darle brillo al mueble.
4)
excessivo.
Do not expose the furniture to weather or excessive
heat.
No exponer el mueble a interperies ni al calor
excesivo.
5) Ao terminar a montagem, limpe o ambiente e o
When the assembly is finished, clean the room and
the furniture.
Al terminar el armado, limpie al ambiente y al mueble.
FERRAMENTAS / TOOLS / HERRAMIENTAS
MARTELO
MARTELO DE BORRACHA
HAMMER
MARTILLO
TRENA
CHAVE PHILLIPS
MEASURING TAPE
PHILLIPS SCREWDRIVER
LLAVE PHILLIPS
RUBBER HAMMER
MARTILLO GOMA
PARAFUSADEIRA
SCREWDRIVER
DESTORNILLADOR

Publicidad

loading

Resumen de contenidos para GenialFlex Moveis 3017

  • Página 1 Do not expose the furniture to weather or excessive heat. Ref.: 3017 The furniture must be mounted on the floor, to do No exponer el mueble a interperies ni al calor this, use the box itself to protect and not damage the excesivo.
  • Página 2 COMP LARG LGTH WDTH DPTH DESCRIPTION LARG ANCH GROS CANT (mm) (mm) (mm) PRATELEIRA PLATE PANEL REPISA TRAVESSA FRONTAL FRONTAL PLATE TRAVESSA TRASEIRA BACK PLATE TRAVESSA LATERAL SIDE PLATE 2180 PRATELEIRA CABIDEIRO CABINET PLATE PANEL REPIZA GABINETE...
  • Página 3 FERRAGENS / HARDWARE / HERRAJES USE THE RULER TO IDENTIFY THE SCREWS DESCRIPTION CODE UTILICE LA REGLA PARA IDENTIFICAR LOS TORNILLOS CANT CAVILHA WOODEN DOWEL TARUGO (mm) PARAFUSO 3,5X40mm SCREW 3,5X40mm TORNILLO 3,5X40mm PARAFUSO 4X12mm SCREW 4X12mm TORNILLO 4X12mm CANTONEIRA DE 2 FUROS METALLIC ANGLE CANTONERA 2 AGUJEROS PESO SUPORTADO / WEIGHT SUPPORTED / PESO SOPORTADO...
  • Página 5 42mm...
  • Página 6 APERTE COM A CHAVE ALLEN O PARAFUSO DO CABIDEIRO. IF MODULES ARE ADDED FOLLOW TIGHTEN THE CABINET SCREW THE INSTRUCTIONS IN STEP 13. WITH THE ALLEN WRENCH. APRIETE EL TORNILLO DEL INSTRUCCIONES DEL PASO 13. GABINETE CON LA LLAVE ALLEN.
  • Página 7 USE A BUCHA DE ACORDO COM O MATERIAL DA PAREDE USE LA BUJE DE ACUERDO CON EL MATERIAL DE LA PARED USE THE BUSHING ACCORDING TO THE WALL MATERIAL FIXAR NA PAREDE. PASSO 18. FOR FIXING WITH MORE THAN ONE MODULE, JOIN BEFORE MATERIAL DA PAREDE: MATERIAL DA PAREDE: MATERIAL DA PAREDE:...
  • Página 8 G:\Engenharia Genialflex\Documentos MadeiraMadeira\Imagens para manuais MadeiraMadeira\Palmas.JPG EM SEGUIDA ADICIONE OS TAPA-FURO. TO JOIN DIFFERENT MODULES, USE THE "L" SCREWS, THEN ADD THE HOLE COVER. LOS TORNILLOS "L", LUEGO AGREGA LOS TAPONES DE LOS AGUJEROS. G:\Engenharia Genialflex\Documentos MadeiraMadeira\Imagens para manuais MadeiraMadeira\Legal.JPG...