ZKTeco D0BPA Guía Rápida página 8

Step 3: Add the Device to the App
1. Open the app, tap the "+" button on the top right corner
of the interface, and then select the "Add Device" option.
Select the "Video Doorbell" option and then choose the
corresponding model purchased.
2. Tick "Next" if you have finished the above steps on the
interface. Select the desired Wi-Fi and enter the correct
password. Then tap the "Next" button.
3. Show the QR code towards the device lens, and the
device will scan the QR code. Once you see the LED
indicator blinks red rapidly (twice per second), tap the
"I Heard a Prompt" button on your mobile, the App will
connect the device automatically.
Note: Please hold the phone about 15 to 20 cm (6 to 8
inches) away from the doorbell. You can slightly move your
mobile device forward and backward for better scanning.
4. You can manually change the name of the device once
you see the message "Added successfully" on the
mobile app. To finish the setting, tap the "Done" button.
Note: If you failed to connect your device to Wi-Fi, press and
hold the RESET Button for 5 seconds until the LED indicator
begins to blink red (once per second), then repeat the above
steps.
Pair the Doorbell Chime
Operation Steps:
1. To power on the device, use a universal power adapter
with a DC 5V/1A output or insert three LR6/AA batteries.
2. Press the Settings Button on the doorbell chime, then the
red LED will blink, indicating that pairing mode is active.
3. Press the Doorbell Button to match the indoor chime,
then the doorbell chime will generate a sound and its
blue LED will blink, indicating that pairing operation is
successful.
7