Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
PARTS & FEATURES
Drain
Cap
(2) Adjustable
Leveling
Legs
OPERATION INSTRUCTIONS
TEMPERATURE CONTROL
NOTE: If the freezer has been placed in a horizontal or tilted position for any period
of time wait 24 hours before plugging the unit in.
• The settings of the temperature control are "0, 1, 2, 3, 4, 5, 6, 7." Adjust the
temperature control to the setting that best suits your needs.
• When the unit is turned on, the green run light will illuminate to indicate the
compressor is running. It will turn off when the compressor cycles off.
NOTE: When the run light is off, it does not indicate that the power to the unit is off.
• Turning the temperature to "0" position will shut off the cooling cycle, but does
not turn off the electrical power to the unit.
NOTE: • Wait 3-5 minutes before restarting if you unplug the freezer. The unit may fail
to operate properly if restarted too quickly.
• If the ambient temperature is too high, the freezer may not reach the desired
target temperature.
• Large amounts of foods will lower the cooling efficiency of the appliance.
• Do not place the foods on the air outlet and leave spaces for airflow.
• If you choose to change the thermostat setting, adjust thermostat control
one increment at a time. Allow several hours for temperature to stabilize
between adjustments.
Controls
Temperature
Control
Run Light
ENGLISH
RUN
Page 9
Publicidad
