English
the playlist� If the device does not find a playable file, it
resets to the last mode used�
2. Playback
To play / pause music, press the
through the playlist, repeatedly press the
alternatively the
button (10)�
Equalizer
Press the EQ button (7) to switch between the individual
sound settings ‑ normal / classic / jazz / pop / rock / bass /
treble / speech� The selected mode is displayed as text on
the display�
Date and time
Press the MODE button (6) repeatedly to switch the device
to the TIME mode�
1. Date and time settings
Press and hold the MODE button (6) to switch to the date
and time setting (the text Set time will appear on the dis‑
play) until the digits at the clock position start flashing�
By repeatedly pressing the
turning the VOL/ (1) knob, set the desired hour�
To switch to the minute or seconds setting, briefly press
the
button (8)�
After pressing the
button (8) again, the device will
switch to the date setting (the text Set date appears on
the display)� Set the date in the same fashion as the time
setting� The format of the displayed date is YYYY ‑ MM ‑
DD�
To exit the date and time setting mode, briefly press the
MODE button (6)�
Alarm clock 1/2
Press the MODE button (6) repeatedly to switch the device
to the TIME mode�
1. Alarm settings
Briefly press the clock in order to switch to the 1st alarm
setting (the text Alarm1 set will appear on the display)�
Briefly press the clock again to switch to the 2nd alarm set‑
ting (the text Alarm2 set will appear on the display)� The
digits at the clock position will start flashing�
By repeatedly pressing the
turning the VOL/ (1) knob, set the desired hour�
To switch to the minute setting, briefly press the
ton (8)�
After pressing the
button (8) again, the text OFF or
HE will start flashing� By repeatedly pressing the
(10) button, or by turning the VOL/ (1) knob, set the
text ON to turn the alarm on and OFF to turn the alarm off�
To exit the alarm setting mode, briefly press the MODE
button (6)�
2. Turning off the alarm
The activated alarm emits a sharp beeping sound� To turn
off the alarm, press the
Power bank / charger
1. Charging an external device
The USB port can be used to charge other devices, such as
mobile phones, tablets and other electronic devices with
a charging input of 5 V / max� 2�5 A�
External devices can only be charged when the device is
switched on�
14
button (8)� To scroll
button (9), or
(9) or
(10) buttons, or by
(9) or
(10) buttons, or by
button (8)�
Storage
If stored while packaged, the device can be stored in a dry
storage area without heating, if the temperature inside
does not drop below ‑5 °C�
If stored while unpackaged, the device can only be stored
in a dry storehouse where the temperature does not drop
below +5 °C, and where there are no sudden changes in
temperature�
Instructions and information on
handling of used package
Dispose of used packaging materials at a municipal waste
disposal site�
Disposal of old electrical and
electronic equipment
This symbol on the products and / or accompanying
documents means that used electrical and electron‑
ic products should not be mixed with general
household waste� Return these products to desig‑
nated collection points for proper disposal, recovery and
recycling� Alternatively, in some parts of the EU or other
European countries, you may return your products to your
local retailer when purchasing a new product equivalent�
By ensuring this product is disposed of correctly, you will
prevent potential negative consequences for the environ‑
ment and for human health, which could otherwise be
caused by inappropriate disposal of this product� Contact
your local authority or the nearest collection point for fur‑
ther details� Improper disposal of this type of waste may
result in penalties in accordance with national regulations�
Warranty
Our devices come with a warranty for material or produc‑
tion defects in accordance with the legal regulations of the
given country, for a period of no shorter than 12 months� In
EU countries, the warranty period is 24 months for private
use exclusively(proven by an invoice or bill of delivery)�
Damage caused by natural wear and tear, overloading,
improper handling, damage caused by the user or by
use contrary to the operating manual, or damage already
known at the time of purchase is excluded from the war‑
ranty�
but‑
Returns can only be accepted if the device is sent back
to the supplier or a NAREX authorised service centre in
a non‑dismantled state� Store and keep the operating
(9) or
manual, safety instructions, list of spare parts and proof of
purchase� If not kept, the manufacturer's current warranty
terms always apply�
Note
Due to constant research and development, the manufac‑
turer reserves the right to change the technical informa‑
tion stated here�