SPECIFICATIONS
Speaker driver (mm)
S/N Ratio (dB)
Frequency range (Hz-KHz)
Continuous playing time
Charging time by cable
Battery capacity Speaker
Mic function
Pick up function
BT version
BT pairing name
Waterproof level
Lumen
Solar charging power
CHARGING THE SPEAKER
A full charge by cable takes approximately 3 hours and plays continuously
7.5 hours. Connect the speaker to the Type-C charging cable to charge.
When the LED indicator is RED, the speaker is charging. The LED indicator
goes off when the device is fully charged.
Place the Solar panel in direct and consistent sunlight. The charging time
through sunlight depends on many factors (Brightness of the light, angle
of the light, etc.).
HOW TO USE
If you want to pair your mobile device with the speaker, please make
sure the BT mode on your device is switched on. Switch the power on/off
button on to pair the device. After doing so the speaker will be visible in
the Bluetooth devices overview of your device. Please select 'Skywave solar
speaker' to pair your mobile device with the speaker.
57mm
80dB
100Hz-20KHz
7.5 hours
3 hours
1500mAh*2
yes
yes
5.3
Skywave solar speaker
IPX5
25
1W (5V/200mA)