Hepha Trekking 7 Manual Del Usuario página 10

Before First Ride
6. Select assist mode
6.1 Select assist mode
If you turn the power on, the assist mode is reset to OFF irregardless of the assist mode
that you had selected before the last power OFF.
Press the UP and DOWN button on the switch to your preferred assist mode.
up button
down button
6.2 Walk assist
The walk assistance makes it easier to push your bike. The speed in this function depends
on the selected gear and can reach a maximum of 6 km/h.
To activate the walk assistance, press and hold the DOWN button on the switch for 3
seconds. The display shows WALK mode. Press and keep it held down when pushing the
bike.
To deactivate the walk assistance, press the UP button on the switch, and switch to your
preferred assist mode.
hold the down botton on
13
current assist mode
The walk assist function must only be used when pushing the bike. There is a
risk of injury if the wheels of the bike are not in contact with the ground while
using walk assistance.
The walk assist mode will exit if you pedal.
7. Removal of the battery
STEP 1
push
STEP 2
insert the key
and rotate
Before First Ride
To remove the battery cover,
press and hold the steel tab
and push it up. Put the battery
cover on the floor.
Insert the battery key, rotate it,
press the metal shrapnel down and
remove the battery.
metal shrapnel
14