Tamarack Technologies GlideWear GW-PRO Instrucciones De Uso Y Cuidado

EN
For friction and shear relief beneath a
prosthetic liner
User Instructions & Tips
1. Place the patch against the area
of skin you want to protect. If an
existing wound is present, apply
over a wound dressing.
2. Roll the prosthetic liner over the
limb to complete placement.
3. Use a clean, dry patch daily for
continuous protection.
4. Machine wash warm with like
colors. Tumble cool or line dry.
Scan for Product Video!
Notice: Not indicated for placement directly against
open wounds. Consult your primary caregiver if you
have any questions or concerns related to the use
of this product.
Latex Free. Wash with mild detergent.
For more information about Tamarack's
friction management products, visit:
www.tamarackhti.com
Email: info@tamarackhti.com
Call: (763) 795-0057
Toll-Free: (866) 795-0057
Tamarack Habilitation Technologies, Inc.
1670-94th Lane NE, Blaine, MN 55449
Tel: 866.795.0057
E-mail: info@tamarackhti.com
ISO13485: 2016 Registered QMS Rev. 9/23
© 2023 Tamarack Habilitation Technologies, Inc.
Glidewear is a registered trademark of MIPS, manufactured in the USA by Tamarack HTI
Patented US8646459 - US9241853 - GB2478206 - CA2738162 - Other Patents Pending
SmartKnit is a registered trademark of KnitRite | All Rights Reserved
Prosthetic Liner Patch
GW-PRO
™
Standard GlideWear Patch
Material: 85% Nylon, 15% Spandex
Thread: 100% Polyester
DOES NOT CONTAIN LATEX
Made in USA from Globally Sourced Materials
Disposal: Recycle per federal,
state, local regulations