MonsterShop PixMax 210509 Guia Del Usuario página 5

SAFETY ADVICE
SAFE WORKING PRACTICE
• The pressure screw should not be over tightened as this can damage the heat press.
• Do not set the temperature any higher than 240
overheat and stop working.
• Please use insulated gloves when removing finished goods as they will be very hot.
USER GUIDE
OPERATION INSTRUCTIONS
LED DISPLAY
For your reference, pressing the
through different programmes. These are as follows.
Programme 1 (P - 1): Allows you to set the required temperature.
Programme 2 (P - 2): Allows you to set the required time.
Programme 3 (P - 3): Allows you to switch between Fahrenheit and Celsius: if you set the
temperature at 180°C then change the temperature in P 3 to Fahrenheit, the machine will
auto-adjust to the equal temperature, in this instance to 356°F.
Programme 4 (P - 4): Set at '0' .
Programme 5 (P - 5): Set at '0' .
C as this will cause the heat press to
o
button on the Touchscreen LED display runs
210509- PIXMAX SWING HEAT PRESS
05