Publicidad
Idiomas disponibles
Idiomas disponibles
DELAY Menu
The DELAY menu is used to adjust the delay time, The range is 0-116m.
BLUETOOTH Menu
BLUETOOTH CONNECT:Switch to ON in the Bluetooth bar of DSP menu, then the Bluetooth
will be operative and the Bluetooth flag ON the screen will be blinking. Open the mobile
device to connect the Bluetooth of the speaker. When the Bluetooth connection is successful,
the Bluetooth flag ON the screen will stop flashing.
TWS CONNECT:
Switch to TWS in the Bluetooth bar of DSP menu in one of any two speakers. The speaker
that switches to TWS state first is the master speaker.Then switch another speaker to TWS
in the Bluetooth bar of the DSP menu a sound will advise that the connection is successful
and the Slave speaker Bluetooth flag will stop flashing. Connect the device to the master
speakers a music will play in stereo on the 2 speakers.
LCD DIM Menu
The LCD Dim menu is used to dim the display when the display is idle for twenty second.
Available options for this selection are: ON or OFF. The default is ON.
BRIGHT Menu
The Bright menu is used to determine the brightness of the LCD. The range is 1 to 10. The
default is 5.
CONTRAST Menu
The Contrast menu is used to determine the contrast on the LCD. The range is 1 to 10. The
default is 5.
RESET Menu
The Reset menu is used to reset the loudspeaker to original factory settings. Available
options for this selection are: NO or YES. The default selection is NO. To reset the system to
original factory settings, do the following:
1. From the DSP menu, select RESET.
The reset Confirm Reset message appears
2. Select YES.
The loudspeaker restarts and resets the system to the original factor settings.
INFO Menu
The Information menu is used to display the Brand, product name and firmware
version.
8
Publicidad
