Trevi MDV 6300 BT Guía De Referencia página 9

All manuals and user guides at all-guidesbox.com
ENGLISH MDV 6300 BT
CAR STEREO CONNECTIONS
Connect the car stereo via the ISO connector.
To ensure a proper ISO connection, verify the following connection points:
the 12 V permanent battery shall be connected to the Yellow wire (BATTERY);
the 12 V ignition key dashboard shall be connected to the Red wire (IGNITION KEY);
the 12 V position lights shall be connected to the Pink wire (LAMP IN).
Thus connected, the car stereo only turns on with the ignition key in and the car stereo front panel comes turn
on together with position lights.
Should the car stereo not come on after its connection via the ISO connector, bridge the Yellow and Red wires.
Should no connection to the 12 V position lights be available, bridge the Pink and Blue wires (ANTENNA POWER).
Thus connected, the car stereo front panel comes on as the car stereo is turned on.
Connect the PARKING BRAKE Brown wire to the handbrake switch. Should this wire connection be omitted, no
image shall be available on the LCD screen.
TURNING ON
TURNING ON AND OFF
Press and hold the POWER key (2) on the car stereo front panel or the PWR key (1) on the remote control to
turn on the car stereo.
Hold for a few seconds the POWER key (2) to turn it off.
SOURCE SELECTION
Press repeatedly the MOD key (6) on the car stereo front panel or the SRC key (13) on the remote control to
select the source you wish to reproduce. The available sources include RADIO, DVBT, AUX1, AUX2,
BLUETOOTH. The CD/DVD, SD CARD and USB sources are only available if the corresponding supports are
present.
AUDIO CONTROLS
VOLUME AND TONE CONTROL
Press repeatedly the volume control VOL/SEL (8) on the car stereo front panel or the SEL key (14) on the remote
control to display the adjustable audio settings.
The available settings are: L-FRONT (front left channel volume), the R-FRONT (front right channel volume),
L-REAR (rear left channel volume), R-REAR (rear right channel volume), SUBWOOF (toggle sub-woofer output),
BASS, MIDDLE, TREBLE and VOL (overall volume).
Turn the volume control VOL/SEL (8) clockwise / counter-clockwise to increase / decrease the desired level.
The same adjustment can be made with the VOL- and VOL+ keys (14) of the remote control.
MUTE FUNCTION
Press the POWER / MUTE key (2) on the car stereo front panel or the PWR/ key (1) on the remote control
to temporarily switch off the sound. Press it again to restore the initial conditions.
EQ FUNCTION
Press the EQ key (19) on the remote control to apply predefined equalization modes including POP / CLASS
/ ROCK / OFF to any source.
These equalization modes differ in their treble and bass settings.
LOUD FUNCTION
Press the LOUD key (16) of the remote control to activate or deactivate the loudness.
This feature enhances the bass tones at low volume, ensuring a better listening experience.
9