Sharp MultiSync PN-ME652 Información De Montaje página 2

About Optional Table Top Stand
For installation, follow the instructions included with the stand. Use only those devices recommended by the manufacturer.
NOTE:
• PN-ME432, PN-ME502, and PN-ME552 use ST-43M. PN-ME652 use ST-65M.

• For the ST-43M, ONLY use screws which are included with the optional table top stand.
For the ST-65M, ONLY use thumbscrews and attach the stand holders which are included with the optional table top
stand. Install the stand so the long end of the feet face forward.

• The monitor can only be used in the landscape orientation with the tabletop stand.
MultiSync model name
PN-ME432
PN-ME502
PN-ME552
PN-ME652
Height adjustment (PN-ME432/PN-ME502/PN-ME552)
1. The lines on the stand pole are indicators of the height adjustment (Figure 1). Please adjust the pipe to the lines.
2. Please install the stand pole and the pipe with included screws. Please screw the two screw holes at the pipe
(Figure 2).
Optional table top stand
ST-43M (screws are included)
ST-65M (thumbscrews, screws, clamps, and stand holders are included)
PN-ME552 High/Low
PN-ME432, PN-ME502
Adjust the pipe to a line
Figure 1
Pipe
Figure 2
Pipe
Stand pole
[ENG] English